Adjust the final elements of your blinds by editing then confirming your order below.
Your Order Summary
Measurements
Completing your blind
Blinds NZ > Shop > Roller Blinds > Blackout Blinds > Blackout Vibe Roller
Our blackout blinds are an excellent choice for your home design. Both regulating heat and maintaining control of your privacy, installing these window coverings can be a great way of investing in your health and happiness. By furnishing your home with blackout blinds you will be treating yourself to consistently blissful sleep, free of light interruption and excessive heat.
Combo Brackets are available either left or right control (controls must be at the same end) Both blinds front roll or bottom back roll option
General Manufacturing Information If blinds are ordered at separate times then we cannot guarantee that the colour will match. We strongly recommend that all blinds for one room are ordered at the same time. Blinds between 6sqm & 8sqm are more difficult to operate. They may be hard to lift & lower for users who are not physically strong. Roller tube deflection & fabric bagging may also be an issue. Blinds over 8sqm are not within warranty. The tube will deflect and the fabric will bag. We recommend using a Link Bracket.
Mechanisms & Brackets – The standard mechanism is Acmeda RB07 in White, Black, Cream and Grey. Bottom Rails – Standard is for Dual Bottom rail with either the Curved or Flat side on the front of the blind. Dual Rail Colours are Anodised, White, Black ,& Cream
Chains – Standard chains are Continuous Plastic Chains in either White, Black, Cream or Grey. The only metal option is Stainless Steel which attracts a surcharge.
Vibe Fabric
Technical: • Composition: 100% polyester with acrylic coating • Nominal Weights: 360gsm – 400gsm • Nominal thickness: 0.33mm – 0.36mm • PVC & Lead free • Light Fastness: minimum 6 (Blue Scale). Tested to ISO 105-B02:2014 Performance: • Opacity: Blackout. Exceeds standard AS2663.3:1999. • Dust and Mould Resistant Protection: • Complies with Building Code of Australia requirements for Class 2 to 9 (a) buildings. • Greenguard Gold Accredited (no harmful VOC emissions) Care: • Surface dust should be removed with duster or soft cloth. Fabric may be wiped with a damp sponge and dried with a clean cloth. Never use abrasive products or solvents/industrial based cleaners. Do not roll up fabric which is damp.
Δ
The maximum width for one roller blind is 3000mm. We do however, provide a 2 in one solution for openings greater than 3000mm.
On the "Build My Blind" page:
Best Products at very competitive prices. Nationwide and to the Pacific Islands Close
