Adjust the final elements of your blinds by editing then confirming your order below.
Your Order Summary
Measurements
Completing your blind
Blinds NZ > Shop > Roller Blinds > Sunscreen Blinds > Light Filtering Le Reve
Sunscreen roller blinds are available in a wide range of colours with the option of combining as a “combo blind” with any blackout blind to give the best of both worlds. Sunscreen fabrics can reduce UV and heat by up to 97% while allowing “soft light” into your room. Suitable for daytime privacy.
General Manufacturing Information If blinds are ordered at separate times then we cannot guarantee that the colour will match. We strongly recommend that all blinds for one room are ordered at the same time. Blinds between 6sqm & 8sqm are more difficult to operate. They may be hard to lift & lower for users who are not physically strong. Roller tube deflection & fabric bagging may also be an issue. Blinds over 8sqm are not within warranty. The tube will deflect and the fabric will bag. We recommend using a Link Bracket.
MECHANISMS & BRACKETS – The standard mechanism is Acmeda RB07 in White, Black, Cream and Grey. BOTTOM RAILS – Standard is for Dual Bottom rail with either the Curved or Flat side on the front of the blind. Dual Rail Colours are Anodised, White, Black ,& Cream
CHAINS – Standard chains are Continuous Plastic Chains in either White, Black, Cream or Grey. The only metal option is Stainless Steel which attracts a surcharge.
Technical: • Composition (BO): 100% Polyester with Colour Co-Ordinated Foamed Acrylic Backing • Composition (LF): 100% Polyester with Acrylic Coating • PVC Free • Light Fastness: minimum 5 (Blue Scale) Tested to ISO 105-B02:2014 • Nominal Weight: 410gsm (BO), 250gsm (LF) • Nominal Thickness: 0.65mm (BO), 0.30mm (LF) Performance: • Opacity: Light Filtering and Blackout (Complies to AS 2663.3.1999) Protection: • Complies with Building Code of Australia requirements for Class 2 to 9 (a) buildings. Tested to AS 1530 Part III. • Greenguard Gold Accredited (no harmful VOC emissions) Care: • Surface dust should be removed with duster or soft cloth. Never use abrasive products or solvent/industrial based cleaners. • Colour variances may occur between fabric production batches. These variances are within industry tolerances.
Δ
The maximum width for one roller blind is 3000mm. We do however, provide a 2 in one solution for openings greater than 3000mm.
On the "Build My Blind" page:
Best Products at very competitive prices. Nationwide and to the Pacific Islands Close